Design and Evaluation of Efficient Medium Access Control Solutions for Vehicular Environments

[EN] In recent years, advances in wireless technologies and improved sensing and computational capabilities have led to a gradual transition towards Intelligent Transportation Systems (ITS) and related applications. These applications aim at improving road safety, provide smart navigation, and eco-friendly driving. Vehicular Ad hoc Networks (VANETs) provide a communication structure for ITS by equipping cars with advanced sensors and communication devices that enable a direct exchange of information between vehicles. Different types of ITS applications rely on two types of messages: periodic beacons and event-driven messages. Beacons include information such as geographical location, speed, and acceleration, and they are only disseminated to a close neighborhood. Differently from beacons, event-driven messages are only generated when a critical event of general interest occurs, and it is spread within a specific target area for the duration of the event. The reliability of information exchange is one of the main issues for vehicularcommunications since the safety of people on the road is directly related to the effectiveness of these transmissions. A Medium Access Control (MAC) protocol must guarantee reliable beacon broadcasting within deadline bounds to all vehicles in the neighbourhood, thereby providing them timely notifications about unsafe driving conditions or other hazardous events. Moreover, infotainment and comfort applications require reliable unicast transmissions that must be taken into account. However, high node mobility, highly dynamic topology, and lack of a central control unit, are issues that make the design of a reliable MAC protocol for vehicular environments a very difficult and challenging task, especially when efficient broadcasting strategies are required. The IEEE 802.11p MAC protocol, an approved amendment to the IEEE 802.11 standard, is a random access protocol that is unable to provide guaranteed delay bounds with sufficient reliability in vehicular scenarios, especially under high channel usage. This problem is particularly serious when implementing (semi-) automated driving applications such as platooning, where inter-vehicle spacing is drastically reduced, and the control loop that manages and maintains the platoon requires frequent, timely and reliable exchange of status information (beacons). In this thesis novel protocols compatible with the IEEE 802.11 and 802.11p standards are proposed in order to optimally adjust the contention window size for unicast applications in Mobile Ad hoc Networks (MANETs) and VANETs. Experimental tests comparing our proposals to existing solutions show that the former are able to improve the packet delivery ratio and the average end-to-end delay for unicast applications. Concerning efficient message diffusion (broadcast) in VANET environments, we proposed token-based MAC solutions to improve the performance achieved by existing 802.11p driving safety applications in different vehicular environments, including highway, urban, and platooning scenarios. Experimental results show that the proposed solutions clearly outperform 802.11p when delay-bounded beacons and event notifications must be delivered.[ES] Recientemente, los avances en las tecnologías inalámbricas y las mejoras en términos de capacidades de sensorización y computación de los dispositivos electrónicos, han dado lugar a una transición gradual hacia servicios y aplicaciones de los Sistemas Inteligentes de Transporte (ITS). Estas aplicaciones tienen como objetivo mejorar la seguridad vial, proporcionar una navegación inteligente, y promover la conducción eco-eficiente. Las redes vehiculares ad hoc (VANETs) proporcionan una infraestructura de comunicaciones para ITS al equipar los coches con sensores avanzados y dispositivos de comunicación que permiten el intercambio directo de información entre vehículos. Los diferentes tipos de aplicaciones ITS se basan en dos tipos de mensajes: mensajes periódicos conocidos como beacons y mensajes asociados a eventos. Los mensajes periódicos incluyen información relativa a la ubicación geográfica, la velocidad y la aceleración, entre otros, y sólo son distribuidos entre los vehículos vecinos. A diferencia de estos beacons, los mensajes asociados a eventos sólo se generan cuando se produce un evento crítico de interés general, el cual se propaga dentro del área de interés de dicho evento y mientras éste siga activo. La fiabilidad del intercambio de información es uno de los principales problemas para las comunicaciones vehiculares, debido principalmente a que las aplicaciones de seguridad dependen directamente de la eficacia de estas transmisiones. Un protocolo de Control de Acceso al Medio (MAC) debe garantizar la difusión fiable de información a todos los vehículos vecinos dentro de unos límites máximos de retardo, proporcionándoles las notificaciones oportunas respecto a condiciones de conducción inseguras y otros eventos peligrosos. Por otra parte, las aplicaciones de información y entretenimiento, así como las aplicaciones orientadas al confort, también requieren transmisiones fiables extremoa-extremo. Sin embargo, la alta movilidad de los vehículos, la variabilidad de la topología, así como la falta de una unidad central de control, son factores que hacen que el diseño de un protocolo MAC fiable para entornos vehiculares sea una tarea especialmente compleja, especialmente cuando son necesarias estrategias de difusión eficientes. El protocolo MAC IEEE 802.11p, una modificación ya aprobada al estándar IEEE 802.11 original para entornos de comunicación vehiculares, es un protocolo de acceso que no es capaz de garantizar unos límites de retardo con la fiabilidad necesaria para estos entornos, especialmente en escenarios de alta utilización del canal inalámbrico. Este problema es particularmente importante a la hora de implementar aplicaciones de conducción (semi-)automática, como el caso de grupos de vehículos donde la separación entre vehículos se reduce drásticamente, y el sistema de control que gestiona y mantiene el grupo requiere de un intercambio frecuente de información fiable y acotado en retardo. En esta tesis se proponen nuevos protocolos MAC compatibles con los estándares IEEE 802.11 y 802.11p basados en el ajuste del tamaño de la ventana de contención para aplicaciones unicast en rede MANETs y VANETs. Los resultados experimentales obtenidos comparando nuestras propuestas con las soluciones existentes muestran que los protocolos propuestos son capaces de mejorar la tasa de entrega de paquetes y el retardo medio extremo-a-extremo para aplicaciones unicast. En lo que respecta a la difusión eficiente de mensajes broadcast en entornos VANET, se han propuesto soluciones MAC basadas en el uso de tokens que mejoran las prestaciones de aplicaciones de conducción segura basadas en el estándar 802.11p, tanto en autopistas, zonas urbanas, y escenarios con grupos de vehículos. Los resultados experimentales muestran que las soluciones propuestas superan claramente al protocolo 802.11p cuando es necesario entregar mensajes y notificaciones de eventos con restricc[CA] Recentment, els avan en les tecnologies sense fils i les millores en termes de capacitats de sensorització i computació dels dispositius electrònics, han donat lloc a una transició gradual cap a serveis i aplicacions dels sistemes intelligents de transport (ITS). Aquestes aplicacions tenen com a objectiu millorar la seguretat vial, proporcionar una navegació intelligent, i promoure la conducció ecoeficient. Les xarxes vehiculars ad hoc (VANET) proporcionen una infraestructura de comunicacions per a ITS, ja que equipen els cotxes amb sensors avançats i dispositius de comunicació que permeten l'intercanvi directe d'informació entre vehicles. Els diversos tipus d'aplicacions ITS es basen en dos classes de missatges: missatges periòdics coneguts com a beacons i missatges associats a esdeveniments. Els missatges periòdics inclouen informació relativa a la ubicació geogràfica, la velocitat i l'acceleració, entre uns altres, i només són distribuïts entre els vehicles veïns. A diferència d'aquests beacons, els missatges associats a esdeveniments només es generen quan es produeix un esdeveniment crític d'interès general, el qual es propaga dins de l àrea d'interès d'aquest esdeveniment i mentre aquest seguisca actiu. La fiabilitat de l'intercanvi d'informació és un dels principals problemes per a les comunicacions vehicular, principalment perquè les aplicacions de seguretat depenen directament de l'eficàcia d'aquestes transmissions. Un protocol de control d'accés al medi (MAC) ha de garantir la difusió fiable d'informació a tots els vehicles veïns dins d'uns límits màxims de retard, i proporcionar-los les notificacions oportunes respecte a condicions de conducció insegures i altres esdeveniments perillosos. D'altra banda, les aplicacions d'informació i entreteniment, com també les aplicacions orientades al confort, també requereixen transmissions fiables extrema-extrem. No obstant això, l'alta mobilitat dels vehicles, la variabilitat de la topologia, i la falta d'una unitat central de control, són factors que fan que el disseny d'un protocol MAC fiable per a entorns vehiculars siga una tasca especialment complexa, especialment quan són necessàries estratègies de difusió eficients. El protocol MAC IEEE 802.11p, una modificació ja aprovada a l'estàndard IEEE 802.11 original per a entorns de comunicació vehiculars, és un protocol d'accés que no és capa garantir uns límits de retard amb la fiabilitat necessària per a aquests entorns, especialment en escenaris d'alta utilització del canal sense fil. Aquest problema és particularment important a l'hora d'implementar aplicacions de conducció (semi)automàtica, com el cas de grups de vehicles en què la separació entre vehicles es redueix dràsticament, i el sistema de control que gestiona i manté el grup requereix un intercanvi freqüent d'informació fiable i delimitat en retard. En aquesta tesi es proposen nous protocols MAC compatibles amb els estàndards IEEE 802.11 i 802.11p basats en l'ajust de les dimensions de la finestra de contenció per a aplicacions unicast en xarxes MANET i VANET. Els resultats experimentals obtinguts comparant les nostres propostes amb les solucions existents mostren que els protocols proposats són capa de millorar la taxa de lliurament de paquets i el retard mitjà extrem-a-extrem per a aplicacions unicast. Pel que fa a la difusió eficient de missatges broadcast en entorns VANET, s'han proposat solucions MAC basades en l'ús de tokens que milloren les prestacions d'aplicacions de conducció segura basades en l'estàndard 802.11p, tant en autopistes, zones urbanes, i escenaris amb grups de vehicles. Els resultats experimentals mostren que les solucions proposades superen clarament el protocol 802.11p quan cal lliurar missatges i notificacions d'esdeveniments amb restriccions de latència.Balador, A. (2016). Design and Evaluation of Efficient Medium Access Control Solutions for Vehicular Environments [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/64073TESI

A survey on vehicular communication for cooperative truck platooning application

Platooning is an application where a group of vehicles move one after each other in close proximity, acting jointly as a single physical system. The scope of platooning is to improve safety, reduce fuel consumption, and increase road use efficiency. Even if conceived several decades ago as a concept, based on the new progress in automation and vehicular networking platooning has attracted particular attention in the latest years and is expected to become of common implementation in the next future, at least for trucks.The platoon system is the result of a combination of multiple disciplines, from transportation, to automation, to electronics, to telecommunications. In this survey, we consider the platooning, and more specifically the platooning of trucks, from the point of view of wireless communications. Wireless communications are indeed a key element, since they allow the information to propagate within the convoy with an almost negligible delay and really making all vehicles acting as one. Scope of this paper is to present a comprehensive survey on connected vehicles for the platooning application, starting with an overview of the projects that are driving the development of this technology, followed by a brief overview of the current and upcoming vehicular networking architecture and standards, by a review of the main open issues related to wireless communications applied to platooning, and a discussion of security threats and privacy concerns. The survey will conclude with a discussion of the main areas that we consider still open and that can drive future research directions.(c) 2022 The Author(s). Published by Elsevier Inc. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/)

Reducing Channel Contention in Vehicular Environments Through an Adaptive Contention Window Solution

© 2013 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.Intelligent Transportation Systems (ITS) are attracting growing attention both in industry and academia due to the advances in wireless communication technologies, and a significant demand for a wide variety of applications targeting this kind of environments are expected. In order to make it usable in real vehicular environments, achieving a well-designed Medium Access Control (MAC) protocol is a challenging issue due to the dynamic nature of Vehicular Ad Hoc Networks (VANETs), scalability issues, and the variety of application requirements. Different standardization organizations have selected IEEE 802.11 as the first choice for VANET environments considering its availability, maturity, and cost. The contention window is a critical parameter for handling medium access collisions by the IEEE 802.11 MAC protocol, and it highly affects the communications performance. The impact of adjusting the contention window has been studied in Mobile Ad-Hoc Networks (MANETs), but the vehicular communications community has not yet addressed this issue thoroughly. This paper proposes a new contention window control scheme, called DBM-ACW, for VANET environments. Analysis and simulation results using OMNeT++ in a highway scenario show that DBM-ACW provides better overall performance compared with previous proposals, even with high network densities.This work was partially supported by the Ministerio de Ciencia e Innovacióm , Spain, under Grant TIN2011-27543-C03-01Balador, A.; Tavares De Araujo Cesariny Calafate, CM.; Cano Escribá, JC.; Manzoni, P. (2013). Reducing Channel Contention in Vehicular Environments Through an Adaptive Contention Window Solution. IEEE. https://doi.org/10.1109/WD.2013.6686512

A density-based contention window control scheme for unicast communications in vehicular ad hoc networks

[EN] Achieving a well-designed medium access control (MAC) protocol is a challenging issue to improve communications efficiency due to the dynamic nature of vehicular ad hoc networks (VANETs). IEEE 802.11p standard was selected as the best choice for vehicular environments considering its availability, maturity, and cost. The common problem in all IEEE 802.11 based protocols is scalability, exhibiting performance degradation in highly variable network scenarios. Experimental results for the IEEE 802.11-based MAC protocol show the importance of contention window adjustment on communications performance; However the vehicular communications community has not yet addressed this issue in unicast communication environments. This paper proposes a novel contention window control scheme for VANET environments based on estimating the network density, which is then used to dynamically adapt the CW size. Analysis and simulation results showthat our proposal provides better overall performance compared with previous proposals, even in high network density scenarios.This work was supported by the Ministerio de Economía y Competitividad, Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, Proyectos I+D+I 2014, Spain, under Grant TEC2014-52690-R.Balador, A.; Tavares De Araujo Cesariny Calafate, CM.; Cano, J.; Manzoni, P. (2017). A density-based contention window control scheme for unicast communications in vehicular ad hoc networks. International Journal of Ad Hoc and Ubiquitous Computing. 24(1-2):65-75. doi:10.1504/IJAHUC.2017.080913S6575241-

DTB-MAC: Dynamic Token-Based MAC Protocol for reliable and efficient beacon broadcasting in VANETs

© 2015 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.Most applications developed for vehicular environments rely on broadcasting as the main mechanism to disseminate their messages. However, in IEEE 802.11p, which is the most widely accepted MAC protocol for vehicular communications, all transmissions remain unacknowledged if broadcasting is used. Furthermore, safety message transmission requires a strict delay limit and a high reliability, which is an issue for random access MAC protocols like IEEE 802.11p. Therefore, transmission reliability becomes the most important issue for broadcast-based services in vehicular environments. In this paper, we propose a hybrid MAC protocol, referred as Dynamic Token-Based MAC Protocol (DTB-MAC). DTB-MAC uses both a token passing mechanism and a random access MAC protocol to prevent channel contention as much as possible, and to improve the reliability of safety message transmissions. Our proposed protocol tries to select the best neighbouring node as the next transmitter, and when it is not possible, or when it causes a high overhead, the random access MAC protocol is used instead. Based on simulation experiments, we show that the DTB-MAC protocol can achieve better performance compared with IEEE802.11p in terms of channel utilization and beacon delivery ratio.This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01.Balador, A.; Tavares De Araujo Cesariny Calafate, CM.; Cano Escribá, JC.; Manzoni, P. (2015). DTB-MAC: Dynamic Token-Based MAC Protocol for reliable and efficient beacon broadcasting in VANETs. IEEE. https://doi.org/10.1109/CCNC.2015.7157955

Supporting Beacon and Event-Driven Messages in Vehicular Platoons through Token-Based Strategies

[EN] Timely and reliable inter-vehicle communications is a critical requirement to support traffic safety applications, such as vehicle platooning. Furthermore, low-delay communications allow the platoon to react quickly to unexpected events. In this scope, having a predictable and highly effective medium access control (MAC) method is of utmost importance. However, the currently available IEEE 802.11p technology is unable to adequately address these challenges. In this paper, we propose a MAC method especially adapted to platoons, able to transmit beacons within the required time constraints, but with a higher reliability level than IEEE 802.11p, while concurrently enabling efficient dissemination of event-driven messages. The protocol circulates the token within the platoon not in a round-robin fashion, but based on beacon data age, i.e., the time that has passed since the previous collection of status information, thereby automatically offering repeated beacon transmission opportunities for increased reliability. In addition, we propose three different methods for supporting event-driven messages co-existing with beacons. Analysis and simulation results in single and multi-hop scenarios showed that, by providing non-competitive channel access and frequent retransmission opportunities, our protocol can offer beacon delivery within one beacon generation interval while fulfilling the requirements on low-delay dissemination of event-driven messages for traffic safety applications.This work was partially supported by the Knowledge Foundation (KKS) via the ELECTRA project, the SafeCOP project, which is funded from the ECSEL Joint Undertaking under grant agreement n0 692529, and from national funding.Balador, A.; Uhlemann, E.; Tavares De Araujo Cesariny Calafate, CM.; Cano, J. (2018). Supporting Beacon and Event-Driven Messages in Vehicular Platoons through Token-Based Strategies. Sensors. 18(4):1-17. https://doi.org/10.3390/s18040955S117184Omar, H. A., Zhuang, W., & Li, L. (2013). VeMAC: A TDMA-Based MAC Protocol for Reliable Broadcast in VANETs. IEEE Transactions on Mobile Computing, 12(9), 1724-1736. doi:10.1109/tmc.2012.142Bergenhem, C., Hedin, E., & Skarin, D. (2012). Vehicle-to-Vehicle Communication for a Platooning System. Procedia - Social and Behavioral Sciences, 48, 1222-1233. doi:10.1016/j.sbspro.2012.06.1098Hadded, M., Muhlethaler, P., Laouiti, A., Zagrouba, R., & Saidane, L. A. (2015). TDMA-Based MAC Protocols for Vehicular Ad Hoc Networks: A Survey, Qualitative Analysis, and Open Research Issues. IEEE Communications Surveys & Tutorials, 17(4), 2461-2492. doi:10.1109/comst.2015.2440374Fernandes, P., & Nunes, U. (2012). Platooning With IVC-Enabled Autonomous Vehicles: Strategies to Mitigate Communication Delays, Improve Safety and Traffic Flow. IEEE Transactions on Intelligent Transportation Systems, 13(1), 91-106. doi:10.1109/tits.2011.2179936Hassanabadi, B., & Valaee, S. (2014). Reliable Periodic Safety Message Broadcasting in VANETs Using Network Coding. IEEE Transactions on Wireless Communications, 13(3), 1284-1297. doi:10.1109/twc.2014.010214.122008OMNeT++http://www.omnetpp.orgSommer, C., German, R., & Dressler, F. (2011). Bidirectionally Coupled Network and Road Traffic Simulation for Improved IVC Analysis. IEEE Transactions on Mobile Computing, 10(1), 3-15. doi:10.1109/tmc.2010.133Akhtar, N., Ergen, S. C., & Ozkasap, O. (2015). Vehicle Mobility and Communication Channel Models for Realistic and Efficient Highway VANET Simulation. IEEE Transactions on Vehicular Technology, 64(1), 248-262. doi:10.1109/tvt.2014.231910

Congestion Control for Vehicular Environments by Adjusting IEEE 802.11 Contention Window Size

The final publication is available at Springer via http://dx.doi.org/10.1007/978-3-319-03889-6_30Medium access control protocols should manage the highly dynamic nature of Vehicular Ad Hoc Networks (VANETs) and the variety of application requirements. Therefore, achieving a well-designed MAC protocol in VANETs is a challenging issue. The contention window is a critical element for handling medium access collisions in IEEE 802.11, and it highly affects the communications performance. This paper proposes a new contention window control scheme, called DBM-ACW, for VANET environments. Analysis and simulation results using OMNeT++ in urban scenarios show that DBM-ACW provides better overall performance compared with previous proposals, even with high network densities.This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01Balador, A.; Tavares De Araujo Cesariny Calafate, CM.; Cano Escribá, JC.; Manzoni, P. (2013). Congestion Control for Vehicular Environments by Adjusting IEEE 802.11 Contention Window Size. En Algorithms and Architectures for Parallel Processing. Springer. 259-266. https://doi.org/10.1007/978-3-319-03889-6_30S259266Booysen, M.J., Zeadally, S., van Rooyen, G.-J.: Survey of media access control protocols for vehicular ad hoc networks. IET Communications 5(11), 1619–1631 (2011)Kenney, J.: Standards and regulations. In: Hartenstein, H., Laberteaux, K.P. (eds.) VANET: Vehicular Applications and Inter-networking Technologies, ch. 10, pp. 365–428. Wiley (2010)Stanica, R., Chaput, E., Beylot, A.-L.: Enhancements of IEEE 802.11p Protocol for Access Control on a VANET Control Channel. In: 2011 IEEE International Conference on Communications (ICC), June 5-9, pp. 1–5 (2011)Calafate, C.T., Fortino, G., Fritsch, S., Monteiro, J., Cano, J., Manzoni, P.: An efficient and robust content delivery solution for IEEE 802.11p vehicular environments. Journal of Network and Computer Applications 35(2), 753–762 (2012)Cali, F., Conti, M., Gregori, E.: Dynamic tuning of the IEEE 802.11 protocol to achieve a theoretical throughput limit. IEEE/ACM Transactions on Networking 8(6), 785–799 (2000)Wu, H., Cheng, S., Peng, Y., Long, K., Ma, J.: IEEE 802.11 distributed coordination function (DCF): analysis and enhancement. In: IEEE International Conference on Communications, ICC 2002, vol. 1, pp. 605–609 (2002)Balador, A., Movaghar, A., Jabbehdari, S.: History based contention window control in ieee 802.11 mac protocol in error prone channel. Journal of Computer Science 6(2), 205–209 (2010)Chrysostomou, C., Djouvas, C., Lambrinos, L.: Applying adaptive QoS-aware medium access control in priority-based vehicular ad hoc networks. In: 2011 IEEE Symposium on Computers and Communications (ISCC), June 28-July 1, pp. 741–747 (2011)Jang, H.-C., Feng, W.-C.: Network Status Detection-Based Dynamic Adaptation of Contention Window in IEEE 802.11p. In: 2010 IEEE 71st Vehicular Technology Conference (VTC 2010-Spring), May 16-19, pp. 1–5 (2010)http://www.omnetpp.org/http://inet.omnetpp.org/Behrisch, M., Bieker, L., Erdmann, J., Krajzewicz, D.: SUMO - Simulation of Urban MObility: An Overview. In: The Third International Conference on Advances in System Simulation, SIMUL 2011 (2011)Baguena, M., Tornell, S., Torres, A., Calafate, C.T., Cano, J.C., Manzoni, P.: VACaMobil: VANET Car Mobility Manager for OMNeT++. In: IEEE International Conference on Communications 2013 - 3rd IEEE International Workshop on Smart Communication Protocols and Algorithms (SCPA 2013), Budapest, Hungary (June 2013)Baguena, M., Calafate, C.T., Cano, J., Manzoni, P.: Towards realistic vehicular network simulation models. In: 2012 IFIP Wireless Days (WD), November 21-23, pp. 1–3 (2012)http://www.openstreetmap.org

A reliable token-based MAC protocol for delay sensitive platooning applications

© 2015 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.Platooning is both a challenging and rewarding application. Challenging since strict timing and reliability requirements are imposed by the distributed control system required to operate the platoon. Rewarding since considerable fuel reductions are possible. As platooning takes place in a vehicular ad hoc network, the use of IEEE 802.11p is close to mandatory. However, the 802.11p medium access method suffers from packet collisions and random delays. Most ongoing research suggests using TDMA on top of 802.11p as a potential remedy. However, TDMA requires synchronization and is not very flexible if the beacon frequency needs to be updated, the number of platoon member changes or if retransmissions for increased reliability are required. We therefore suggest a token-passing medium access method where the next token holder is selected based on beacon data age. This has the advantage of allowing beacons to be re-broadcasted in each beacon interval whenever time and bandwidth is available. We show that our token-based method is able to reduce the data age and increase reliability considerably compared to pure 802.11p.This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543- C03-01. Balador is funded by ERASMUS+ programme, and Böhm and Uhlemann are also funded by the Knowledge Foundation through the ACDC projectBalador, A.; Böhm, A.; Uhlemann, E.; Tavares De Araujo Cesariny Calafate, CM.; Cano Escribá, JC. (2015). A reliable token-based MAC protocol for delay sensitive platooning applications. IEEE. https://doi.org/10.1109/VTCFall.2015.7390813

AORTA: Advanced Offloading for Real-time Applications

We are currently witnessing the second wave of cloud services that go beyond web storefronts and IT systems, aiming for digitalization of industrial systems. Automation and time-sensitive systems are now taking their first steps toward the cloud. The AORTA project aims to facilitate this transition by providing key technology components needed for real-time services running in the cloud. The ambition is to support a future robotics ecosystem that enables a new level of flexible productivity in industrial production. AORTA will develop technologies that allow offloading of real-time services/functions to the edge and cloud. We will build upon recent advances in 5G, cloud, and networking technologies. The AORTA framework will support a fluid compute model where functionality will be dynamically deployed locally, in the edge, or in the cloud and support integration and real-time performance irrespective of where it executes. Results of the project will be demonstrated in a real-world robotics manufacturing and construction scenarios operating via a 5G network with real-time edge and large-scale cloud service. The AORTA technologies will provide opportunities for automation enterprises and system integrators by adding real-time capabilities needed to evolve beyond the currently closed ecosystem. They will also add value to telecom providers and operators that may host these new automation services in addition to their current portfolio

Wireless Communication Technologies for Safe Cooperative Cyber Physical Systems

Cooperative Cyber-Physical Systems (Co-CPSs) can be enabled using wireless communication technologies, which in principle should address reliability and safety challenges. Safety for Co-CPS enabled by wireless communication technologies is a crucial aspect and requires new dedicated design approaches. In this paper, we provide an overview of five Co-CPS use cases, as introduced in our SafeCOP EU project, and analyze their safety design requirements. Next, we provide a comprehensive analysis of the main existing wireless communication technologies giving details about the protocols developed within particular standardization bodies. We also investigate to what extent they address the non-functional requirements in terms of safety, security and real time, in the different application domains of each use case. Finally, we discuss general recommendations about the use of different wireless communication technologies showing their potentials in the selected real-world use cases. The discussion is provided under consideration in the 5G standardization process within 3GPP, whose current efforts are inline to current gaps in wireless communications protocols for Co-CPSs including many future use casesinfo:eu-repo/semantics/publishedVersio